Рекуператор
Shell & Tube Heat Exchangers
By transferring energy from hot gases to a cold air stream, it saves energy and поддержкаs environmental sustainability.
About the Рекуператор
By transferring energy from hot gases to a cold air stream, it saves energy and поддержкаs environmental sustainability.
Shell & Tube Architecture
They are preferred for промышленные применения that require high давление and температура. Different tube layouts and material options provide проект flexibility.
Промышленные Application Strength
They deliver long-lasting решения for steam condensation, процесс heating and cooling, waste-heat recovery, and power-plant применения. Tanpera shell-and-tube теплообменники are manufactured with an ASME/EN-compliant продуктion approach.
Key Features
- Shell-and-tube design for процесс применения that require high давление and температура.
- Used in steam condensation, waste-heat recovery, and power-plant circuits.
- Tube layout and material selection are optimized for проект conditions.
Монтаж and Пусконаладка
During пусконаладка, a давление test, flow adjustment, and температура control must be performed. The Tanpera technical team provides on-site поддержка and training.
Послепродажное обслуживание
Часто задаваемые вопросы
A Рекуператор is an промышленные теплообменник in which one fluid flows inside the tubes while the other circulates on the shell side. The tube bundle and shell structure withstand high давление and температура; it is widely used in steam condensation and процесс heating применения.
It delivers reliable производительность at high operating давление and температура and is preferred for steam, condensate, and aggressive shell-side fluids. In-tube очистка and individual tube replacement are possible. Although larger than plate теплообменники, it provides a long-lasting решение under heavy промышленные conditions.
Tubes are manufactured from AISI 304/316 stainless steel, carbon steel, or duplex; the shell is carbon steel or stainless steel. Depending on the application, copper-nickel, titanium, or special-alloy tubes may be used. Material selection is based on fluid corrosion and design давление.
They are used in power plants, refining and petrochemicals, food pasteurization, steam системы, marine, ОВиК central plants, and waste-heat recovery проекты. Steam condenser, экономайзер, and рекуператор применения belong to this family.
Recovering heat from waste steam, exhaust gas, and процесс outlets reduces fuel consumption. Stable operation at high температура differences increases система COP and эффективность in central plants and промышленные бойлер circuits.
Fluid расходs, inlet/outlet температураs, phase condition (steam/condensate), operating давление, загрязнение factor, and монтаж constraints are required. Tanpera provides thermodynamic calculation and material selection together using an ASME/EN approach.
An annual general inspection and давление test are recommended; in high-загрязнение применения, chemical or mechanical очистка of the tube bundle may be required. Anode and corrosion protection should be monitored regularly in seawater применения.
You can download the English брошюра and user manual as PDF from the Documents tab on the продукт page. Updated technical documents are published regularly in this section.
You can submit your проект details via the Quote Form on the продукт page or contact our sales team at sales@tanpera.com. Our engineering team will contact you for расчёт and pricing based on your проект data.
