Спиральный теплообменник
Plate Heat Exchangers
Single-piece or openable body options offer ease of обслуживание.
About Спиральные теплообменники
Spiral Channel Design
Durability and Эффективность
Single-piece or openable body options offer ease of обслуживание.
Key Features
- Wide channel geometry keeps clogging risk low for particle-laden and high-viscosity fluids.
- Single-piece or openable body options provide easy обслуживание and очистка.
- Reliable heat transfer in wastewater, pulp, and chemical процесс lines.
Монтаж and Пусконаладка
During пусконаладка, давление testing, flow adjustment, and температура control must be performed. The Tanpera technical team provides field поддержка and training.
Послепродажное обслуживание
Система эффективность is preserved over the long term through periodic inspection and производительность measurement.
Часто задаваемые вопросы
Спиральные теплообменники are теплообменники in which fluids exchange heat in single- or double-sided flow within two spiral channels, and are resistant to particle-laden and high-viscosity fluids. Wide channel geometry reduces clogging risk; single-piece or openable body options offer ease of обслуживание.
Спиральные теплообменники operate much more reliably than plate теплообменники with dirty, fibrous, or particle-laden fluids. Compared with tubular types they can be more compact and channel очистка is more practical. In clean процесс применения, plate теплообменники may offer higher heat transfer эффективность.
Channels and body are typically made from AISI 304/316 stainless steel; duplex or special alloys are used for aggressive chemicals. Gaskets and clamping elements are selected from materials suitable for fluid температура.
They are common in pulp and paper, wastewater heating, chemical процессes, food продуктion, marine, and промышленные waste heat recovery. They are preferred for heating or cooling high-viscosity or solid-particle-laden fluids.
Maximum particle size and viscosity in the fluid determine channel height; the typical range is 6–50 mm. A wider channel eases очистка while affecting heat transfer surface. The Tanpera engineering team recommends optimal channel geometry based on fluid analysis.
Flow rate, температура, viscosity, particle size, and allowable перепад давления are taken into account. Spiral length and channel width determine capacity. When you submit your проект data, a detailed расчёт report is prepared.
On openable models, the top cover can be removed for mechanical or high-давление washing. A regular очистка program preserves производительность in dirty-fluid применения. Gasket and clamping checks should be part of the annual обслуживание routine.
You can download the English брошюра and user manual as PDF from the Documents tab on the продукт page. Up-to-date technical documents are published regularly in this area.
You can submit your проект details via the Quote Form on the продукт page or contact our sales team at sales@tanpera.com. Our engineering team will get in touch for расчёт and pricing based on your проект data.
