Бойлер с фиксированным змеевиком
Системы теплового аккумулирования
In the fixed-coil design, the coil comes with the tank; its installer-friendly and largely обслуживание-free construction provides an economical first-investment advantage in residential, shopping-mall, tourism, and промышленные facilities.
About the Fixed Coil Enameled Бойлер
In the fixed-coil design, the coil comes with the tank; its installer-friendly and largely обслуживание-free construction provides an economical first-investment advantage in residential, shopping-mall, tourism, and промышленные facilities.
What Is a Coil Бойлер?
Operating Principle
Hot fluid from the heat source circulates through the fixed coil inside the tank, transfers its heat to the mains water, and returns cooled to the source. In dual-coil (TDB) models, the lower coil can run on solar and the upper coil on the бойлер for hybrid operation.
Advantages
Economical and efficient operation
It uses surplus heat from the existing бойлер/heat pump/solar система; in high-capacity системы it reduces the fuel bill and accelerates return on investment.
Fast heating and high comfort
Hygienic enamel surface
Surfaces in contact with domestic water are coated with high-quality enamel; the smoothness required for corrosion protection and hygiene is achieved.
Low operating loss
Magnesium anode and enamel provide dual protection. A bottom очистка flange and optional heater pocket ease long-term обслуживание and summer operation.
Key Features
- TSB / TDB series: single coil 100–5000 L, dual coil 200–5000 L.
- Fixed coil — economical, installer-friendly, and low обслуживание.
- S235JR construction; DIN 4753-3 enamel + magnesium anode.
- Dual-coil solar-compatible model option.
- High-density polyurethane insulation; Termowen / vinyl outer cladding.
- Storage 10 bar / coil 16 bar / coil 120 °C.
- Sensor pocket, thermometer, recirculation, optional electric heater pocket.
- TS 736, TS EN 13445-3; pre-delivery 1.3× давление test.
Монтаж and Пусконаладка
During пусконаладка, давление testing and flow and температура checks are performed. The Tanpera technical team provides on-site поддержка and training.
Послепродажное обслуживание
The Tanpera сервис network supplies magnesium anodes, gasket sets, sensors, and connection components throughout the проект life.
On fixed-coil models, sediment очистка and anode replacement are performed quickly via the bottom очистка flange; downtime is kept to a minimum. Our technical team works with проект teams for site пусконаладка, operator training, and fault response.
- Magnesium anode and gasket-set supply
- Periodic обслуживание and tank очистка planning
- Пусконаладка, training, and on-site техническая поддержка
- Производительность checks and operating recommendations
Часто задаваемые вопросы
It is a storage бойлер that transfers heat from a бойлер, heat pump, or solar collector to mains water via a fixed coil inside the tank. The enameled S235JR shell provides hygienic storage; the TSB/TDB series is offered in the 100–5000 liter range.
In fixed models the coil is integrated with the tank, offering a more economical first investment and installer-friendly construction. In replaceable models the coil is removed via a flange — advantageous under frequent обслуживание or hard-water conditions. Both types share the same TSB/TDB capacity and давление family.
TSB is single coil (100–5000 L); TDB is dual coil (200–5000 L). On TDB, the lower coil can be connected to solar and the upper coil to the бойлер for hybrid operation. Example notation: TANPERA-TSB 500/10.
Storage 10 bar, coil 16 bar, maximum coil температура 120 °C. Units are tested at 1.3× operating давление before delivery.
100–1000 L: 50 mm, 42 kg/m³ rigid polyurethane + Termowen cladding. 1500–5000 L: 80 mm, 18 kg/m³ open-cell soft polyurethane + vinyl jacket. This construction reduces standby losses.
Storage volume is calculated from unit hot-water consumption with diversity and comfort factors. On a typical 20-apartment estate, ~1000 L single-coil selection is common. Tanpera engineering sizes each проект specifically.
Annual magnesium anode inspection/replacement and tank очистка via the bottom flange are recommended. In hard-water areas, softening or periodic scale management should be planned.
You can download or view the English брошюра and user manual as PDFs from the Documents tab on the продукт page.
Submit your проект details via the Quote Form on the продукт page, or contact our sales team at sales@tanpera.com.
